TiN coating / Triple sided edge spatula tip
TiN coating / Edge spatula tip
TiN coating / Rounded edge spatula tip
Ostroplasties
Unilateral anterior mandibular sampling
Excision of bone torus
Anterior mandibylar harvesting
Mandibular harvesting at approach stage
The cutting part is bone torus
TiN coating / Dots mark 3, 6 and 9 mm from top of tip / Five teeth ; 0.6 mm thick
TiN coating / Dots mark 3, 6, 9, 12 and 15 mm from top of tip / Five teeth ; 0.6 mm thick
TiN coating / Right curved tip* / Three teeth ; 0.6 mm thick
*The direction of the tip’s curve is defined by the tip’s anterior view.
TiN coating / Left curved tip* / Three teeth ; 0.6 mm thick
*The direction of the tip’s curve is defined by the tip’s anterior view.
TiN coating / Dots mark 3, 6 and 9 mm from top of tip / Three teeth ; 0.6 mm thick
TiN coating / Dots mark 3, 6, 9, 12 and 15 mm from top of tip / Three teeth ; 0.6 mm thick
TiN coating / Sharp edge / 0.5 mm thick
TiN coating / Dots mark 3, 6 and 9 mm from top of tip / Three teeth ; 0.6 mm thick
TiN coating / Right curved tip* / Five teeth; 0.6 mm thick
*The direction of the tip’s curve is defined by the tip’s anterior view.
TiN coating / Left curved tip* / Five teeth; 0.6 mm thick
*The direction of the tip’s curve is defined by the tip’s anterior view.
TiN coating / Dot mark 3 mm from top of tip / Five teeth; 0.8 mm thick
TiN coating / 0.7 mm thick
TiN coating / Right angled tip* / 0.7 mm thick /
*The direction of the tip's curve is defined by the tip's anterior view.
TiN coating / Left angled tip* / 0.7 mm thick /
*The direction of the tip's curve is defined by the tip's anterior view.
Extraction
Internal irrigation / Diamond coating / Single use
Internal irrigation / Diamond coating / Single use
Internal irrigation
Internal irrigation / Diamond coating / Single use
Internal irrigation
Internal irrigation
Diamond coating / Diameter of the tip end ; 0.7 mm / Single use
Diamond coating / Diameter of the tip end ; 1.3 mm / Single use
Diamond coating / Diameter of the tip end ; 0.9 mm / Single use
Diamond coating / Diameter of the tip end ; 1.3 mm / Single use
Diamond coating / Diameter ; 2.0 mm / Single use
Diamond coating / Diameter; 2.6 mm / Single use
Conical preparations for implant osteotomies
Implant preparation
Single use / Diamond coating
Single use / Diamond coating
Avulsion of wisdom teeth and impacted teeth
Sinus graft
Flat circular convex elevator / Angled at 90°
Flat circular convex elevator / Angled at 135°
Cone compressor
Sinus membrane
Sinus graft
Straight tip
Right curved tip*
*The direction of the tip's curve is defined by the tip's anterior view.
Left curved tip*
*The direction of the tip's curve is defined by the tip's anterior view.
Includes E-Tip replacement wrench / Plastic Tip is not included
Pack of 3 / V10-S holder is not included
Right curved type* / Pack of 3 / V10-S holder is not included
*The direction of the tip's curve is defined by the tip's anterior view.
Left curved type* / Pack of 3 / V10-S holder is not included
*The direction of the tip's curve is defined by the tip's anterior view.
Pack of 3 / V10-S holder is not included
Diamond coating / For posterior teeth (right angled*) / Single use
* The direction of the tip’s curve is defined by the tip’s anterior view.
Diamond coating / For posterior teeth (left angled*) / Single use
* The direction of the tip’s curve is defined by the tip’s anterior view.
Diamond coating / For anterior and posterior teeth (70°) / Single use
Diamond coating / For anterior teeth (90°) / Single use
Single use; SG6D, SG7D / Reusable; SG1, SG3, SG5, SG11 / Tip holder 1pc. each
Single use; SG6D / Reusable; SG1, SG2R, SG2L, SG4, / Tip holder 1pc. each
Single use; SG6D / Reusable; SG1, SG3, SG9, SG10, SG11 / Tip holder 1pc. each
Single use; E30RD-S, E30LD-S, E31D-S, E32D-S / Reusable; G1-S / Tip holder 1pc. each
Single use; SG15A, SG15B, SG16A, SG16B / Tip holder 1pc. each